Tri Service (DND) for Various Services (A000127)

  1. Data Entry Services
  2. Draftsperson
  3. Illustrator
  4. Technical Data and Publications Manager
  5. Technical Writer
  6. Financial Analyst
  7. Project Management Assistant
  8. Junior Project Management Specialist
  9. Senior Project Management Specialist
  10. Procurement Specialist
  11. Junior Supply Specialist
  12. Senior Supply Specialist
  13. Life Cycle Management Specialist
  14. Junior Technician
  15. Senior Technician
  16. Junior Engineer
  17. Senior Engineer
  18. Specialist
  19. Postgraduate Specialist
  20. Entry Level Software Technician
  21. Junior Software Specialist
  22. Intermediate Software Specialist
  23. Senior Software Specialist

top

Data Entry Services:

Required Services:

These required services will cover a range of data entry support services including, but not necessarily limited to the following:

  1. filing, directing incoming / outgoing electronic and hard copy technical correspondence;
  2. keying in and maintaining data in electronic data bases and/or spreadsheets; and
  3. transferring data between files or systems.

Mandatory Requirements:

  1. minimum education of two (2) years secondary school or equivalent;
  2. minimum of twenty-four (24) months of demonstrated related experience; and
  3. demonstrated experience using commercial spreadsheet and database software applications.

top

Draftsperson:

Required Services:

These required services will cover a range of drafting and illustrating related work including but not necessarily limited to the following:

  1. producing engineering drawings;
  2. producing data lists;
  3. producing illustrated parts breakdown and parts lists; and
  4. preparing document illustrations.

Mandatory Requirements:

  1. minimum of thirty-six (36) months of demonstrated engineering drafting
    experience; and
  2. minimum of twelve (12) months of demonstrated experience in computer aided design (CAD) within the last thirty-six (36) months.

top

Illustrator:

Required Services:

These required services will cover a range of drafting and illustrating related work including but not necessarily limited to the following:

  1. producing engineering drawings;
  2. producing data lists;
  3. producing illustrated parts breakdown and parts lists; and
  4. preparing document illustrations.

Mandatory Requirements:

  1. minimum of thirty-six (36) months of demonstrated experience in the preparation of illustrations through the use of computers within the last sixty (60) months.

top

Technical Data and Publications Manager:

Required Services:

These required services will cover a range of technical data and publications related services including but not necessarily limited to the following:

  1. physically assembling complete or partial Technical Data Packages (TDPs) and identifying and actioning deficiencies in data packages of systems and equipment;
  2. receiving, logging, taking custody of and acknowledging the receipt of TDPs which describe additions, modifications and/or deletions of technical data;
  3. collecting, reviewing and updating configuration management data for input into the environmental configuration management information system;
  4. modifying, validating and compiling technical data package lists, that will include:
    1. technical publications Canadian Forces Technical Orders (CFTOs) in general;
    2. specifications;
    3. performance test sheets;
    4. equipment and system data lists and drawings;
    5. repair and overhaul specifications; and
    6. other technical descriptors in accordance with Data Technical Descriptions (DTDs) and Data Item Descriptions (DIDs);
  5. updating, validating and compiling technical data action notices;
  6. assisting and participating in physical and functional configuration audits of systems and equipment;
  7. reviewing documents, drawings and associated data for conformance to DND Standards;and
  8. formatting technical documents in accordance with Canadian Forces Technical Orders (CFTOs), Computer Aided Logistics System (CALS) Data Technical Descriptions (DTDs) and Data Item Descriptions (DIDs).

Mandatory Requirements:

  1. minimum education of two (2) years secondary school or equivalent;
  2. minimum of thirty-six (36) months, in the last seven (7) years, of demonstrated practical hands-on experience in a technical data and publication related activity;
  3. working knowledge of the theory, practices, procedures and techniques applicable to technical data and publications management in support of DND equipment systems. For this criterion, '"working knowledge" is defined as theoretical and practical knowledge of the subject matter required to successfully perform related duties and tasks efficiently and effectively.

top

Technical Writer:

Required Services:

These required services will cover a range of technical data and publications related services including but not necessarily limited to the following:

  1. physically assembling complete or partial Technical Data Packages (TDPs) and identifying and actioning deficiencies in data packages of systems and equipment;
  2. receiving, logging, taking custody of and acknowledging the receipt of TDPs which describe additions, modifications and/or deletions of technical data;
  3. collecting, reviewing and updating configuration management data for input into the environmental configuration management information system;
  4. modifying, validating and compiling technical data package lists, that will include:
    1. technical publications Canadian Forces Technical Orders (CFTOs) in general;
    2. specifications;
    3. performance test sheets;
    4. equipment and system data lists and drawings;
    5. repair and overhaul specifications; and
    6. other technical descriptors in accordance with Data Technical Descriptions (DTDs) and Data Item Descriptions (DIDs);
  5. updating, validating and compiling technical data action notices;
  6. assisting and participating in physical and functional configuration audits of systems and equipment;
  7. reviewing documents, drawings and associated data for conformance to DND Standards;and
  8. formatting technical documents in accordance with Canadian Forces Technical Orders (CFTOs), Computer Aided Logistics System (CALS) Data Technical Descriptions (DTDs) and Data Item Descriptions (DIDs).

Mandatory Requirements:

  1. minimum of twelve (12) months of demonstrated experience writing and
    formatting technical documents through the use of computers within the last tthirty-six (36) months.

top

Financial Analyst:

Required Services:

These required services will cover a range of financial analyses including, but not necessarily limited to the following:

  1. evaluating financial procedures;
  2. conducting cost benefit analysis and life cycle costing;
  3. developing business plans,
  4. developing models to carry out cost analysis of the resources required to perform specific inspections related to a project;
  5. performing risk analysis;
  6. determining the resources required for implementation of projects such as acquisition cost, operation and maintenance costs and both recurring and non- recurring costs; and
  7. assisting in developing costs for specific activities such as: direct project costs, project support overhead, corporate and administrative (C&A) overhead, costs of products and services, and other related costs.

Mandatory Requirements:

  1. university undergraduate degree in administration or commerce or other related degree; and
  2. minimum of forty-eight (48) eight months of demonstrated experience as an accountant or as a financial analyst/advisor.

top

Project Management Assistant:

Required Services:

Specific tasks may include, but are not necessarily limited to the following:

  1. coordinating project management activities including financial, planning and contracting aspects;
  2. planning and organizing a project management office;
  3. giving briefings on progress and concerns of the project;
  4. preparing documentation in response to scheduled and unscheduled reports, returns and observations to update management of project progress;
  5. coordinating the activities of project personnel, DND internal customers (environmental staff), contractors and other support providers;
  6. preparing formal Statements of Work, work breakdown structures and compliance charts;
  7. producing draft plans and sections for incorporation into the Project Implementation Plan or Request for Proposal; and
  8. preparing draft evaluation plans, criteria and evaluation schedules.

Mandatory Requirements:

  1. minimum of twelve (12) months of demonstrated experience in the last thirty-six (36) months directly providing management support services to a project management team.

top

Junior Project Management Specialist:

Required Services:

Specific tasks may include, but are not necessarily limited to the following:

  1. coordinating project management activities including financial, planning and contracting aspects;
  2. planning and organizing a project management office;
  3. giving briefings on progress and concerns of the project;
  4. preparing documentation in response to scheduled and unscheduled reports, returns and observations to update management of project progress;
  5. coordinating the activities of project personnel, DND internal customers (environmental staff), contractors and other support providers;
  6. preparing formal Statements of Work, work breakdown structures and compliance charts;
  7. producing draft plans and sections for incorporation into the Project Implementation Plan or Request for Proposal; and
  8. preparing draft evaluation plans, criteria and evaluation schedules.

Mandatory Requirements:

  1. Secondary school diploma; and
  2. Work experience of either:
    • a minimum of twenty-four (24) months of demonstrated experience within the last five (5) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $1 million Cdn;

      - OR -

      a minimum of twelve (12) months of demonstrated experience within the last three (3) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $1 million Cdn -and- having successfully completed the equivalent of six months of full time Project Management Training at a provincially accredited Project Management Training Institution or evidence of Project Management Institute accreditation.

top

Senior Project Management Specialist:

Required Services:

Specific tasks may include, but are not necessarily limited to the following:

  1. coordinating project management activities including financial, planning and contracting aspects;
  2. planning and organizing a project management office;
  3. giving briefings on progress and concerns of the project;
  4. preparing documentation in response to scheduled and unscheduled reports, returns and observations to update management of project progress;
  5. coordinating the activities of project personnel, DND internal customers (environmental staff), contractors and other support providers;
  6. preparing formal Statements of Work, work breakdown structures and compliance charts;
  7. producing draft plans and sections for incorporation into the Project Implementation Plan or Request for Proposal; and
  8. preparing draft evaluation plans, criteria and evaluation schedules.

Mandatory Requirements:

  1. university undergraduate degree in any field; and
  2. work experience of either:
    • minimum of sixty (60) months of demonstrated experience within the last ten (10) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $10 million Cdn ;

      - OR-

      Minimum of thirty-six (36) months of demonstrated experience within the last eight (8) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $10 million Cdn - -and - having successfully completed the equivalent of six months of full time Project Management Training at a provincially accredited Project Management Training Institution or evidence of Project Management Institute accreditation.

      top

Procurement Specialist:

Required Services:

Specific tasks may include, but are not necessarily limited to the following:

  1. carrying out the planning and documentation connected with purchasing and ordering in accordance with Treasury Board guidelines and Government regulations;
  2. providing financial data and assisting with the preparation of Synopsis Sheets or other documents intended to obtain Governmental or Departmental spending approval;
  3. preparing and presenting cash forecasts;
  4. preparing and amending procurement instruments;
  5. preparing life-cycle contract cost estimates;
  6. assisting with the drafting, amending or vetting of procurement instruments;
  7. preparing support cost option analyses;
  8. monitoring contract activities;
  9. liaising with contractors and PWGSC;
  10. preparing supply requisition and acquisition documents; and
  11. maintaining financial data.

Mandatory Requirements:

  1. Combination of education and experience as follows:
    1. university undergraduate degree in any field -and- a minimum of twenty-four (24) months of demonstrated practical hands-on experience within the last sixty (60) months in a procurement and finance related activity;

      - OR -

      graduation from a provincially recognized college program in procurement, finance, economics, commerce, accounting or materiel management (or in possession of such a certificate from a provincial licensing body) -and- a minimum of thirty-six (36) months of demonstrated experience within the last six (6) years in a procurement and finance related activity;

      - OR -

      secondary school diploma -and- a minimum of sixty (60) months of demonstrated practical hands-on experience within the last eight (8) years in a procurement and finance related activity;
  2. a minimum of twenty-four (24) months of the required experience above must have been acquired in the federal government, either as a civilian or military Crown employee or as a Contractor personnel through extensive experience dealing with the federal government.

top

Junior Supply Specialist:

Required Services:

Specific tasks may include, but are not necessarily limited to the following:

  • preparing supply requisitions or procurement instruments;
  • ordering materiel via the Canadian Forces Supply System (CFSS)
  • establishing, verifying and modifying cataloguing data in the CFSS;
  • responding to and interfacing with the CFSS in support of equipment;
  • planning and implementing materiel provisioning and distribution;
  • establishing and controlling reservations;
  • setting up, maintaining and managing supply accounts in support of Materiel Acquisition and Support (MA&S) activities;
  • performing supply related activities in support of configuration management; and
  • provision and/or analysis of supply activities in support of maintenance, repair, overhaul and Equipment Management Team (EMT) activities.

Mandatory Requirements:

  1. minimum education of two (2) years secondary school or equivalent;
  2. working knowledge of DND supply, financial and technical procedures. For this criterion, '"working knowledge" is defined as theoretical and practical knowledge of the subject matter required to successfully perform related duties and tasks efficiently and effectively.; and
  3. minimum of thirty-six (36) months of demonstrated practical hands-on
    experience in a supply related activity within the last six (6) years.

Senior Supply Specialist:

Required Services:

Specific tasks may include, but are not necessarily limited to the following:

  • preparing supply requisitions or procurement instruments;
  • ordering materiel via the Canadian Forces Supply System (CFSS)
  • establishing, verifying and modifying cataloguing data in the CFSS;
  • responding to and interfacing with the CFSS in support of equipment;
  • planning and implementing materiel provisioning and distribution;
  • establishing and controlling reservations;
  • setting up, maintaining and managing supply accounts in support of Materiel Acquisition and Support (MA&S) activities;
  • performing supply related activities in support of configuration management; and
  • provision and/or analysis of supply activities in support of maintenance, repair, overhaul and Equipment Management Team (EMT) activities.

Mandatory Requirements:

  1. minimum education of two (2) years secondary school or equivalent;
  2. minimum of sixty (60) months of demonstrated experience within the last ten (10) years of practical hands-on experience in a supply related activity including not less than thirty-six (36) months of demonstrated experience managing a Nationally Managed Equipment comprised of not less than 2,000 items within a government supply activity or its industry equivalent.
  3. working knowledge of DND supply, financial, and procurement procedures for
    equipment support.
    For this criterion, “working knowledge” is defined as theoretical and practical knowledge of the subject matter required to successfully
    perform related duties and work efficiently and effectively; and
  4. working knowledge of the theory, practices and techniques applicable to supply
    support for DND inventory, equipment and systems.
    For this criterion, “working
    knowledge” is defined as theoretical and practical knowledge of the subject
    matter required to successfully perform related duties and work efficiently and
    effectively.

top

Life Cycle Manager Specialist:

Required Services:

These required services may include, but are not necessarily limited to the following:

  • conducting engineering studies and analysis to provide technical solutions to stated technical/logistic or operational requirements/problems including preparation of Engineering Changes (ECs);
  • defining standards and criteria related to equipment or systems maintenance;
  • preparing, modifying or updating specifications and drawings;
  • converting specifications and drawings to current standards or electronic formats;
  • preparing, modifying or updating Technical Instructions and Orders;
  • evaluating existing systems;
  • performing configuration management;
  • performing analysis of maintenance, repair and overhaul data;
  • investigating Unsatisfactory Condition Reports (UCRs) and Technical Failure Reports (TFRs);
  • preparing technical statements of requirement, draft specifications and purchase descriptions;
  • preparing data for initial provisioning and repair parts scaling;
  • reviewing the design, development, manufacture, installation and testing of prototype modifications;
  • preparing repair procedures, maintenance schedules and technical data;
  • performing Life Cycle Material Manager (LCMM) activities as detailed in
    A-LP-113-001/FP-001 Life Cycle Management System;
  • preparing life-cycle cost estimates;
  • preparing support cost option analysis for systems and equipment;
  • planning, developing, implementing and administrating a data management system;
  • designing, collating data entry and testing of new databases;
  • planning, directing and controlling the activities of a system development team within scheduled cost and time parameters;
  • performing independent verification and validation services for equipment engineering projects;
  • providing studies and recommendations on application software development standards, methodologies and tools appropriate for the development and maintenance of related software systems;
  • performing equipment project management services;
  • reviewing Repairable Arising Control sheets (RAC) for technical content and making recommendations;
  • reviewing and updating material/equipment specifications;
  • reviewing disposal certificates, making appropriate recommendations, updating maintenance handbooks, parts list and operating manuals; and
  • advising disposition of obsolete CFTO’s, Technical Publications and equipment.

Mandatory Requirements:

  1. Civilian Trained Personnel:
    • Graduation from a two (2) year technical program offered by a recognized technical institute;
      - OR -
    • Eligibility for registration as a technician by a recognized provincial licensing body;
    • Minimum of thirty-six (36) months of demonstrated practical hands-on experience in a maintenance management related activity;
  1. Canadian Forces Trained Personnel:
    • qualified to the QL6 trade level in a related technical field;
  2. working knowledge of evaluation, preparation and implementation of technical documentation;
  3. working knowledge of the preparation and distribution of Integrated Logistics Support (ILS) documentation;
  4. working knowledge of any DND environment Engineering and Maintenance Management System; and
  5. working knowledge of maintenance system interfaces with the Canadian Forces Supply System (CFSS) to support provisioning/re-provisioning functions.
    For this criteria, “working knowledge” is defined as theoretical and practical knowledge of the subject matter required to successfully perform related duties and work efficiently and effectively.

top

Junior Technician:

Required Services:

These required services may include, but are not necessarily limited to the following:

  • performing machinist tasks such as milling, turning, grinding, and fabrication on
    manually and/or computer controlled machines;
  • performing metal manipulation and welding tasks involving oxy-acetylene, MIG, TIG and/or special metal welding techniques;
  • performing vehicle mechanic and/or technician tasks involved in the servicing and repair of vehicle systems and subsystems found within the CF;
  • performing electrician and/or electrical technician tasks associated with the servicing and repair of vehicle, weapon and/or communications systems found within the CF
  • performing weapon technician/ armourer tasks associated with the servicing and repair of weapon and ancillary systems found within the CF;
  • performing optical, and/or optronic servicing and repair of vehicle and/or weapon systems found within the CF;
  • performing electronic technician tasks associated with the servicing and repair of vehicle, weapon and/or communications systems found within the CF;
  • performing installation and operation of test sensors and programmable data recorders used in conjunction with equipment testing; and
  • performing optical data acquisition technical services including film and digital photo services, normal and high speed video, and/or x-ray photography.

Mandatory Requirements:

  1. minimum of twenty-four (24) months of demonstrated experience providing services in a technical field within the last sixty (60) months.

top

Senior Technician:

Required Services:

These required services may include, but are not necessarily limited to the following:

  • performing machinist tasks such as milling, turning, grinding, and fabrication on
    manually and/or computer controlled machines;
  • performing metal manipulation and welding tasks involving oxy-acetylene, MIG, TIG and/or special metal welding techniques;
  • performing vehicle mechanic and/or technician tasks involved in the servicing and repair of vehicle systems and subsystems found within the CF;
  • performing electrician and/or electrical technician tasks associated with the servicing and repair of vehicle, weapon and/or communications systems found within the CF
  • performing weapon technician/ armourer tasks associated with the servicing and repair of weapon and ancillary systems found within the CF;
  • performing optical, and/or optronic servicing and repair of vehicle and/or weapon systems found within the CF;
  • performing electronic technician tasks associated with the servicing and repair of vehicle, weapon and/or communications systems found within the CF;
  • performing installation and operation of test sensors and programmable data recorders used in conjunction with equipment testing; and
  • performing optical data acquisition technical services including film and digital photo services, normal and high speed video, and/or x-ray photography.

Mandatory Requirements:

  1. minimum of sixty (60) months of demonstrated experience providing services in a technical field within the last ten (10) years.

top

Junior Engineer:

Required Services:

The required services encompass all electronic, electrical, optical, mechanical, structural and materiel systems which may include but are not necessarily limited to the following:

  • preparing specifications for and carrying out the integration of systems and equipment;
  • conducting technical studies to produce technical options, validate and assess options, assess technical risks and evaluate designs;
  • developing design and prototype engineering solutions to technical problems;
  • maintaining and updating Unsatisfactory Condition Report (UCR) and Technical Failure Report (TFR) data bases. Researching, evaluating and responding to UCR/TFRs in conjunction with field support representatives;
  • producing draft specifications of systems, sub-systems, equipments, interfaces or ancillaries;
  • tailoring military or commercial standards, specifications or practices for incorporation into system specifications;
  • producing draft technical evaluation plans and evaluation standards;
  • generating and/or evaluating test plans, procedures and reports;
  • conducting specialized electromagnetic compatibility (EMC) studies, producing acceptable EMC standards and test procedures and evaluating EMC /electromagnetic interference (EMI) test results;
  • designing programmable data acquisition, test sensors and recorders used in conjunction with equipment testing;
  • developing simulation and analytical models and utilizing the models for system and sub-system development and assessment;
  • preparing airworthiness certification management plans;
  • managing the planning, coordination, documentation and engineering efforts connected with the airworthiness certification of modifications to air weapon systems;
  • proposing and/or analyzing engineering change proposals, estimating costs / risks and making recommendations;
  • preparing budgetary estimates for the completion of technical programs;
  • preparing space and weight budgets for installations, assessing proposed designs, evaluating prototypes and developing acceptance tests for user hand over;
  • preparing drawings, data packages and systems manuals;
  • preparing interface standards and integration plans for the utilization of current and new systems/equipment;
  • reviewing and making recommendations on work proposals;
  • participating in planning meetings and technical reviews relating to the design, application management and support of software sub-systems;
  • designing, testing and modifying hardware interfaces to digital computers. Confirming the correct functioning of hardware/software interfaces;
  • preparing specifications and statements of work for the procurement of systems;
  • developing quality assurance and configuration management plans and practices;
  • conducting MA&S process and sub-process assessments and re-engineering;
  • tracking, correcting and recording system and equipment configuration status and/or conformance;
  • preparing business cases, i.e. cost/benefit analysis;
  • developing and assessing maintenance strategies, plans and support requirements;
  • performing integrated logistics support (ILS) functions or providing advice and guidance in the ILS area;
  • performing LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle Management System Guideance Manual
  • providing equipment project management services; developing environmental protection standards, practices or policies;
  • preparing and reviewing instructions and procedures regarding the appropriate handling, clean-up, protective clothing and safety measures to deal with hazardous materials. Developing or obtaining specifications such as material Safety Data Sheets for hazardous materials that are new to the CF;
  • conducting environmental or hazardous material assessments of equipment and systems. Assessing the toxicological impact of materials. Investigating alternate non-hazardous options;
  • conducting system integration analyses on the organization and processes involved the introduction of and provision of ongoing support to weapon systems;
  • conducting a detailed derivation of integrated logistic system requirements for weapon systems and planning for the ongoing support to those systems;
  • planning the conduct of, providing technical guidance to and conducting statistical analysis of reliability, maintainability, availability and dependability (RAMD) tests of weapon systems;
  • managing the planning, coordination, documentation and engineering efforts connected with the configuration management of weapon systems;
  • designing, planning, implementing and modifying quality assurance programs within manufacturing, processing or distribution systems;
  • providing human factors engineering (ergonomics) services (physical and cognitive);
  • conducting the human factors engineering process such as planning, analysis, design, test and evaluation, fundamentals and facilities of various environmental systems
  • conduct reviews of structural designs to ensure compliance with appropriate specifications, standards and guidelines;
  • perform structural engineering analyses in the area of traditional stress analysis, preliminary design, finite element analysis, damage tolerance assessments loads derivation, structural dynamic response and/or fracture mechanics analysis; and
  • preparing design documentation in support of structural engineering tasks, including draft stress reports, manufacturing drawings and/or design drawings.

Mandatory Requirements:

  • University undergraduate degree in an applicable field of engineering from a Canadian Council of Professional Engineers (CCPE) accredited engineering program (Copy of certificate to be provided with the Bidder's proposal).

    Alternatively, should the candidate's degree be from a non-CCPE accredited engineering program, their engineering education credentials must be deemed 'substantially equivalent' by the CCPE via an application to the Engineering International - Education Assessment Program, (EI-EAP), (Copy of the official CCPE judgement to be included).

    Finally, as a third alternative, the candidate's engineering education credentials will be considered compliant if the candidate is deemed eligible for registration as a Professional Engineer by a recognized provincial licensing body (proof of which is to be provided with the Bidder's proposal); and
  • Minimum of thirty-six (36) months of demonstrated experience within the last eight (8) years in an applicable engineering field.

top

Senior Engineer:

Required Services:

The required services encompass all electronic, electrical, optical, mechanical, structural and materiel systems which may include but are not necessarily limited to the following:

  • preparing specifications for and carrying out the integration of systems and equipment;
  • conducting technical studies to produce technical options, validate and assess options, assess technical risks and evaluate designs;
  • developing design and prototype engineering solutions to technical problems;
  • maintaining and updating Unsatisfactory Condition Report (UCR) and Technical Failure Report (TFR) data bases. Researching, evaluating and responding to UCR/TFRs in conjunction with field support representatives;
  • producing draft specifications of systems, sub-systems, equipments, interfaces or ancillaries;
  • tailoring military or commercial standards, specifications or practices for incorporation into system specifications;
  • producing draft technical evaluation plans and evaluation standards;
  • generating and/or evaluating test plans, procedures and reports;
  • conducting specialized electromagnetic compatibility (EMC) studies, producing acceptable EMC standards and test procedures and evaluating EMC /electromagnetic interference (EMI) test results;
  • designing programmable data acquisition, test sensors and recorders used in conjunction with equipment testing;
  • developing simulation and analytical models and utilizing the models for system and sub-system development and assessment;
  • preparing airworthiness certification management plans;
  • managing the planning, coordination, documentation and engineering efforts connected with the airworthiness certification of modifications to air weapon systems;
  • proposing and/or analyzing engineering change proposals, estimating costs / risks and making recommendations;
  • preparing budgetary estimates for the completion of technical programs;
  • preparing space and weight budgets for installations, assessing proposed designs, evaluating prototypes and developing acceptance tests for user hand over;
  • preparing drawings, data packages and systems manuals;
  • preparing interface standards and integration plans for the utilization of current and new systems/equipment;
  • reviewing and making recommendations on work proposals;
  • participating in planning meetings and technical reviews relating to the design, application management and support of software sub-systems;
  • designing, testing and modifying hardware interfaces to digital computers. Confirming the correct functioning of hardware/software interfaces;
  • preparing specifications and statements of work for the procurement of systems;
  • developing quality assurance and configuration management plans and practices;
  • conducting MA&S process and sub-process assessments and re-engineering;
  • tracking, correcting and recording system and equipment configuration status and/or conformance;
  • preparing business cases, i.e. cost/benefit analysis;
  • developing and assessing maintenance strategies, plans and support requirements;
  • performing integrated logistics support (ILS) functions or providing advice and guidance in the ILS area;
  • performing LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle Management System Guideance Manual
  • providing equipment project management services; developing environmental protection standards, practices or policies;
  • preparing and reviewing instructions and procedures regarding the appropriate handling, clean-up, protective clothing and safety measures to deal with hazardous materials. Developing or obtaining specifications such as material Safety Data Sheets for hazardous materials that are new to the CF;
  • conducting environmental or hazardous material assessments of equipment and systems. Assessing the toxicological impact of materials. Investigating alternate non-hazardous options;
  • conducting system integration analyses on the organization and processes involved the introduction of and provision of ongoing support to weapon systems;
  • conducting a detailed derivation of integrated logistic system requirements for weapon systems and planning for the ongoing support to those systems;
  • planning the conduct of, providing technical guidance to and conducting statistical analysis of reliability, maintainability, availability and dependability (RAMD) tests of weapon systems;
  • managing the planning, coordination, documentation and engineering efforts connected with the configuration management of weapon systems;
  • designing, planning, implementing and modifying quality assurance programs within manufacturing, processing or distribution systems;
  • providing human factors engineering (ergonomics) services (physical and cognitive);
  • conducting the human factors engineering process such as planning, analysis, design, test and evaluation, fundamentals and facilities of various environmental systems
  • conduct reviews of structural designs to ensure compliance with appropriate specifications, standards and guidelines;
  • perform structural engineering analyses in the area of traditional stress analysis, preliminary design, finite element analysis, damage tolerance assessments loads derivation, structural dynamic response and/or fracture mechanics analysis; and
  • preparing design documentation in support of structural engineering tasks, including draft stress reports, manufacturing drawings and/or design drawings.

Mandatory Requirement:

  • University undergraduate degree in an applicable field of engineering from a
    Canadian Council of Professional Engineers (CCPE) accredited engineering
    program (Copy of certificate to be provided with the Bidder's proposal).

    Alternatively, should the candidate's degree be from a non-CCPE accredited
    engineering program, their engineering education credentials must be
    deemed 'substantially equivalent' by the CCPE via an application to the
    Engineering International - Education Assessment Program, (EI-EAP),
    (Copy of the official CCPE judgement to be included).

    Finally, as a third alternative, the candidate's engineering education credentials will be
    considered compliant if the candidate is deemed eligible for registration as
    a Professional Engineer by a recognized provincial licensing body (proof of
    which is to be provided with the Bidder's proposal); and
  • Minimum of eight (8) years of demonstrated engineering experience in an
    applicable field of engineering of which a minimum of sixty (60) months of
    experience have been within the last ten (10) years.

Specialist:

Required Services:

The required services encompass all electronic, electrical, optical, mechanical, structural and materiel systems which may include but are not necessarily limited to the following:

  • preparing specifications for and carrying out the integration of systems and equipment;
  • conducting technical studies to produce technical options, validate and assess options, assess technical risks and evaluate designs;
  • developing design and prototype engineering solutions to technical problems;
  • maintaining and updating Unsatisfactory Condition Report (UCR) and Technical Failure Report (TFR) data bases. Researching, evaluating and responding to UCR/TFRs in conjunction with field support representatives;
  • producing draft specifications of systems, sub-systems, equipments, interfaces or ancillaries;
  • tailoring military or commercial standards, specifications or practices for incorporation into system specifications;
  • producing draft technical evaluation plans and evaluation standards;
  • generating and/or evaluating test plans, procedures and reports;
  • conducting specialized electromagnetic compatibility (EMC) studies, producing acceptable EMC standards and test procedures and evaluating EMC /electromagnetic interference (EMI) test results;
  • designing programmable data acquisition, test sensors and recorders used in conjunction with equipment testing;
  • developing simulation and analytical models and utilizing the models for system and sub-system development and assessment;
  • preparing airworthiness certification management plans;
  • managing the planning, coordination, documentation and engineering efforts connected with the airworthiness certification of modifications to air weapon systems;
  • proposing and/or analyzing engineering change proposals, estimating costs / risks and making recommendations;
  • preparing budgetary estimates for the completion of technical programs;
  • preparing space and weight budgets for installations, assessing proposed designs, evaluating prototypes and developing acceptance tests for user hand over;
  • preparing drawings, data packages and systems manuals;
  • preparing interface standards and integration plans for the utilization of current and new systems/equipment;
  • reviewing and making recommendations on work proposals;
  • participating in planning meetings and technical reviews relating to the design, application management and support of software sub-systems;
  • designing, testing and modifying hardware interfaces to digital computers. Confirming the correct functioning of hardware/software interfaces;
  • preparing specifications and statements of work for the procurement of systems;
  • developing quality assurance and configuration management plans and practices;
  • conducting MA&S process and sub-process assessments and re-engineering;
  • tracking, correcting and recording system and equipment configuration status and/or conformance;
  • preparing business cases, i.e. cost/benefit analysis;
  • developing and assessing maintenance strategies, plans and support requirements;
  • performing integrated logistics support (ILS) functions or providing advice and guidance in the ILS area;
  • performing LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle Management System Guideance Manual
  • providing equipment project management services; developing environmental protection standards, practices or policies;
  • preparing and reviewing instructions and procedures regarding the appropriate handling, clean-up, protective clothing and safety measures to deal with hazardous materials. Developing or obtaining specifications such as material Safety Data Sheets for hazardous materials that are new to the CF;
  • conducting environmental or hazardous material assessments of equipment and systems. Assessing the toxicological impact of materials. Investigating alternate non-hazardous options;
  • conducting system integration analyses on the organization and processes involved the introduction of and provision of ongoing support to weapon systems;
  • conducting a detailed derivation of integrated logistic system requirements for weapon systems and planning for the ongoing support to those systems;
  • planning the conduct of, providing technical guidance to and conducting statistical analysis of reliability, maintainability, availability and dependability (RAMD) tests of weapon systems;
  • managing the planning, coordination, documentation and engineering efforts connected with the configuration management of weapon systems;
  • designing, planning, implementing and modifying quality assurance programs within manufacturing, processing or distribution systems;
  • providing human factors engineering (ergonomics) services (physical and cognitive);
  • conducting the human factors engineering process such as planning, analysis, design, test and evaluation, fundamentals and facilities of various environmental systems
  • conduct reviews of structural designs to ensure compliance with appropriate specifications, standards and guidelines;
  • perform structural engineering analyses in the area of traditional stress analysis, preliminary design, finite element analysis, damage tolerance assessments loads derivation, structural dynamic response and/or fracture mechanics analysis; and
  • preparing design documentation in support of structural engineering tasks, including draft stress reports, manufacturing drawings and/or design drawings.

Mandatory Requirements:

  1. university undergraduate degree in an applicable field of engineering, science or mathematics; and (2) minimum of sixty (6) months of demonstrated experience in a related specialist field within the last ten (10) years.

top

Postgraduate Specialist:

Required Services:

The required services encompass all electronic, electrical, optical, mechanical, structural and materiel systems which may include but are not necessarily limited to the following:

  • preparing specifications for and carrying out the integration of systems and equipment;
  • conducting technical studies to produce technical options, validate and assess options, assess technical risks and evaluate designs;
  • developing design and prototype engineering solutions to technical problems;
  • maintaining and updating Unsatisfactory Condition Report (UCR) and Technical Failure Report (TFR) data bases. Researching, evaluating and responding to UCR/TFRs in conjunction with field support representatives;
  • producing draft specifications of systems, sub-systems, equipments, interfaces or ancillaries;
  • tailoring military or commercial standards, specifications or practices for incorporation into system specifications;
  • producing draft technical evaluation plans and evaluation standards;
  • generating and/or evaluating test plans, procedures and reports;
  • conducting specialized electromagnetic compatibility (EMC) studies, producing acceptable EMC standards and test procedures and evaluating EMC /electromagnetic interference (EMI) test results;
  • designing programmable data acquisition, test sensors and recorders used in conjunction with equipment testing;
  • developing simulation and analytical models and utilizing the models for system and sub-system development and assessment;
  • preparing airworthiness certification management plans;
  • managing the planning, coordination, documentation and engineering efforts connected with the airworthiness certification of modifications to air weapon systems;
  • proposing and/or analyzing engineering change proposals, estimating costs / risks and making recommendations;
  • preparing budgetary estimates for the completion of technical programs;
  • preparing space and weight budgets for installations, assessing proposed designs, evaluating prototypes and developing acceptance tests for user hand over;
  • preparing drawings, data packages and systems manuals;
  • preparing interface standards and integration plans for the utilization of current and new systems/equipment;
  • reviewing and making recommendations on work proposals;
  • participating in planning meetings and technical reviews relating to the design, application management and support of software sub-systems;
  • designing, testing and modifying hardware interfaces to digital computers. Confirming the correct functioning of hardware/software interfaces;
  • preparing specifications and statements of work for the procurement of systems;
  • developing quality assurance and configuration management plans and practices;
  • conducting MA&S process and sub-process assessments and re-engineering;
  • tracking, correcting and recording system and equipment configuration status and/or conformance;
  • preparing business cases, i.e. cost/benefit analysis;
  • developing and assessing maintenance strategies, plans and support requirements;
  • performing integrated logistics support (ILS) functions or providing advice and guidance in the ILS area;
  • performing LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle Management System Guideance Manual
  • providing equipment project management services; developing environmental protection standards, practices or policies;
  • preparing and reviewing instructions and procedures regarding the appropriate handling, clean-up, protective clothing and safety measures to deal with hazardous materials. Developing or obtaining specifications such as material Safety Data Sheets for hazardous materials that are new to the CF;
  • conducting environmental or hazardous material assessments of equipment and systems. Assessing the toxicological impact of materials. Investigating alternate non-hazardous options;
  • conducting system integration analyses on the organization and processes involved the introduction of and provision of ongoing support to weapon systems;
  • conducting a detailed derivation of integrated logistic system requirements for weapon systems and planning for the ongoing support to those systems;
  • planning the conduct of, providing technical guidance to and conducting statistical analysis of reliability, maintainability, availability and dependability (RAMD) tests of weapon systems;
  • managing the planning, coordination, documentation and engineering efforts connected with the configuration management of weapon systems;
  • designing, planning, implementing and modifying quality assurance programs within manufacturing, processing or distribution systems;
  • providing human factors engineering (ergonomics) services (physical and cognitive);
  • conducting the human factors engineering process such as planning, analysis, design, test and evaluation, fundamentals and facilities of various environmental systems
  • conduct reviews of structural designs to ensure compliance with appropriate specifications, standards and guidelines;
  • perform structural engineering analyses in the area of traditional stress analysis, preliminary design, finite element analysis, damage tolerance assessments loads derivation, structural dynamic response and/or fracture mechanics analysis; and
  • preparing design documentation in support of structural engineering tasks, including draft stress reports, manufacturing drawings and/or design drawings.

Mandatory Requirements:

  1. university postgraduate degree in an applicable field of engineering, science or mathematics; and
  2. minimum of thirty-six (36) months of demonstrated experience in a related specialist field within the last six (6) years.

top

Entry Level Software Technician:

Required Services:

These required services will include, but are not necessarily limited to the following:

  • performing Data Architect tasks such as:
    • analyzing automated or manual information systems and developing data models;
    • extracting data models from existing legacy information systems;(3) planning and estimating modifications of legacy information systems to adhere to new data models;
    • developing information management strategies;
    • developing action plans for enhancing interoperability between legacy information systems;
    • managing data repositories; and
    • preparing briefings to management;
  • performing Software Independent Validation and Verification Specialist tasks such as:
    • reviewing software documentation and visiting development organizations to assess project health;
    • suggesting action to improve project health; and
    • assessing project risk and recommending mitigation strategies;
  • conducting Process Analyst tasks such as:
    • leading software process audits;
    • preparing recommended courses of action after process audits;
    • briefing procurement and technical authorities on contract and technological risks;
    • assisting organizations in implementing improvement plans; and
    • providing cost-benefit analysis on process improvement plans;
  • performing Internet Publisher/Internet Site Designer tasks such as:
    • designing and building web sites;
    • incorporating image files of varying source file formats and edit as required;
    • creating page linkages and mail linkages, implementing Java scripts as required;
    • implementing Hyper-text Markup Language (HTML) and similar systems on a private (IntraNet) network; and
    • performing maintenance on the web sites and private networks;
  • performing design activities such as:
    • designing instrument interfaces between hardware and software and confirming interoperability;
    • designing, testing and modifying hardware interfaces to digital computers; and
    • writing software test code in appropriate languages to confirm hardware/software interfaces;
  • performing Computer Aided Software Engineering (CASE) Tool Specialist tasks such as:
    • providing advice and assistance on CASE tool evaluation and selection;
    • troubleshooting CASE tool functionality problems;
    • solving problems with CASE tool interoperability;
    • performing configuration of tools; and
    • providing support in CASE tool usage; and
  • performing software programming activities such as:
    • providing advice and assistance on software programming code alteration and correction;
    • troubleshooting software problems with custom applications;
    • determining and correcting protocol interoperability between applications; and
    • writing new software code and associated documentation.

Mandatory Requirements:

  1. two (2) year College level certificate in a computer field;

    - OR -

    successful completion of an intensive Information Management/ Information Technology (IM/IT) course with a minimum of six hundred (600) hours of instruction and assignments;

    - OR -

    secondary school diploma with a minimum of twelve (12) months of demonstrated work experience in a related software support field within the last thirty-six (36) months .

top

Junior Software Specialist:

Required Services:

These required services will include, but are not necessarily limited to the following:

  • performing Data Architect tasks such as:
    • analyzing automated or manual information systems and developing data models;
    • extracting data models from existing legacy information systems;(3) planning and estimating modifications of legacy information systems to adhere to new data models;
    • developing information management strategies;
    • developing action plans for enhancing interoperability between legacy information systems;
    • managing data repositories; and
    • preparing briefings to management;
  • performing Software Independent Validation and Verification Specialist tasks such as:
    • reviewing software documentation and visiting development organizations to assess project health;
    • suggesting action to improve project health; and
    • assessing project risk and recommending mitigation strategies;
  • conducting Process Analyst tasks such as:
    • leading software process audits;
    • preparing recommended courses of action after process audits;
    • briefing procurement and technical authorities on contract and technological risks;
    • assisting organizations in implementing improvement plans; and
    • providing cost-benefit analysis on process improvement plans;
  • performing Internet Publisher/Internet Site Designer tasks such as:
    • designing and building web sites;
    • incorporating image files of varying source file formats and edit as required;
    • creating page linkages and mail linkages, implementing Java scripts as required;
    • implementing Hyper-text Markup Language (HTML) and similar systems on a private (IntraNet) network; and
    • performing maintenance on the web sites and private networks;
  • performing design activities such as:
    • designing instrument interfaces between hardware and software and confirming interoperability;
    • designing, testing and modifying hardware interfaces to digital computers; and
    • writing software test code in appropriate languages to confirm hardware/software interfaces;
  • performing Computer Aided Software Engineering (CASE) Tool Specialist tasks such as:
    • providing advice and assistance on CASE tool evaluation and selection;
    • troubleshooting CASE tool functionality problems;
    • solving problems with CASE tool interoperability;
    • performing configuration of tools; and
    • providing support in CASE tool usage; and
  • performing software programming activities such as:
    • providing advice and assistance on software programming code alteration and correction;
    • troubleshooting software problems with custom applications;
    • determining and correcting protocol interoperability between applications; and
    • writing new software code and associated documentation.

Mandatory Requirements:

  1. university undergraduate degree in computer engineering or computer science -and- a minimum of six (6) months of demonstrated work experience in a related software support field within the last thirty-six (36) months;

    - OR -

    two year College level certificate in computer science or equivalent -and- a minimum of twelve (12) months of demonstrated work experience in a related software support field within the last thirty-six (36) months;

    - OR -

    successfulcompletion of an intensive IM/IT course with a minimum of six hundred (600) hours of instruction and assignments -and- a minimum of twelve (12) months of demonstrated work experience in a related software support field within the last thirty-six (36) months;

    - OR -

    a minimum of thirty-six (36) months of demonstrated work experience in a related software support field within the last sixty (60) months.

top

Intermediate Software Specialist:

Required Services:

These required services will include, but are not necessarily limited to the following:

  • performing Data Architect tasks such as:
    • analyzing automated or manual information systems and developing data models;
    • extracting data models from existing legacy information systems;(3) planning and estimating modifications of legacy information systems to adhere to new data models;
    • developing information management strategies;
    • developing action plans for enhancing interoperability between legacy information systems;
    • managing data repositories; and
    • preparing briefings to management;
  • performing Software Independent Validation and Verification Specialist tasks such as:
    • reviewing software documentation and visiting development organizations to assess project health;
    • suggesting action to improve project health; and
    • assessing project risk and recommending mitigation strategies;
  • conducting Process Analyst tasks such as:
    • leading software process audits;
    • preparing recommended courses of action after process audits;
    • briefing procurement and technical authorities on contract and technological risks;
    • assisting organizations in implementing improvement plans; and
    • providing cost-benefit analysis on process improvement plans;
  • performing Internet Publisher/Internet Site Designer tasks such as:
    • designing and building web sites;
    • incorporating image files of varying source file formats and edit as required;
    • creating page linkages and mail linkages, implementing Java scripts as required;
    • implementing Hyper-text Markup Language (HTML) and similar systems on a private (IntraNet) network; and
    • performing maintenance on the web sites and private networks;
  • performing design activities such as:
    • designing instrument interfaces between hardware and software and confirming interoperability;
    • designing, testing and modifying hardware interfaces to digital computers; and
    • writing software test code in appropriate languages to confirm hardware/software interfaces;
  • performing Computer Aided Software Engineering (CASE) Tool Specialist tasks such as:
    • providing advice and assistance on CASE tool evaluation and selection;
    • troubleshooting CASE tool functionality problems;
    • solving problems with CASE tool interoperability;
    • performing configuration of tools; and
    • providing support in CASE tool usage; and
  • performing software programming activities such as:
    • providing advice and assistance on software programming code alteration and correction;
    • troubleshooting software problems with custom applications;
    • determining and correcting protocol interoperability between applications; and
    • writing new software code and associated documentation.

Mandatory Requirements:

  1. university undergraduate degree in computer engineering or computer science -and- a minimum of thirty-six (36) months of demonstrated work experience in a related software support field within the last sixty (60) months;

    - OR -

    two (2) year College level certificate in computer science or equivalent -and- a minimum of forty-eight (48) months of demonstrated work experience in a related software support field within the last seven (7) years;

    - OR -

    successful completion of an intensive IM/IT course with a minimum of six hundred (600) hours of instruction and assignments -and-minimum of forty-eight (48) months of demonstrated work experience in related software support field within the last seven (7) years;

    - OR -

    a minimum of sixty (60) months of demonstrated work experience in a related software support field within the last eight (8) years.

top

Senior Software Specialist:

Required Services:

These required services will include, but are not necessarily limited to the following:

  • performing Data Architect tasks such as:
    • analyzing automated or manual information systems and developing data models;
    • extracting data models from existing legacy information systems;(3) planning and estimating modifications of legacy information systems to adhere to new data models;
    • developing information management strategies;
    • developing action plans for enhancing interoperability between legacy information systems;
    • managing data repositories; and
    • preparing briefings to management;
  • performing Software Independent Validation and Verification Specialist tasks such as:
    • reviewing software documentation and visiting development organizations to assess project health;
    • suggesting action to improve project health; and
    • assessing project risk and recommending mitigation strategies;
  • conducting Process Analyst tasks such as:
    • leading software process audits;
    • preparing recommended courses of action after process audits;
    • briefing procurement and technical authorities on contract and technological risks;
    • assisting organizations in implementing improvement plans; and
    • providing cost-benefit analysis on process improvement plans;
  • performing Internet Publisher/Internet Site Designer tasks such as:
    • designing and building web sites;
    • incorporating image files of varying source file formats and edit as required;
    • creating page linkages and mail linkages, implementing Java scripts as required;
    • implementing Hyper-text Markup Language (HTML) and similar systems on a private (IntraNet) network; and
    • performing maintenance on the web sites and private networks;
  • performing design activities such as:
    • designing instrument interfaces between hardware and software and confirming interoperability;
    • designing, testing and modifying hardware interfaces to digital computers; and
    • writing software test code in appropriate languages to confirm hardware/software interfaces;
  • performing Computer Aided Software Engineering (CASE) Tool Specialist tasks such as:
    • providing advice and assistance on CASE tool evaluation and selection;
    • troubleshooting CASE tool functionality problems;
    • solving problems with CASE tool interoperability;
    • performing configuration of tools; and
    • providing support in CASE tool usage; and
  • performing software programming activities such as:
    • providing advice and assistance on software programming code alteration and correction;
    • troubleshooting software problems with custom applications;
    • determining and correcting protocol interoperability between applications; and
    • writing new software code and associated documentation.

Mandatory Requirements:

  1. university post graduate degree in computer engineering or computer science -and-a minimum of thirty-six (36) months of demonstrated work experience in a related software support field within the last sixty (60) months.

    - OR -

    university undergraduate degree in computer engineering or computer science -and- a minimum of sixty (60) months of demonstrated work experience in a related software support field within the last seven (7) years;

    - OR -

    two (2) year College level certificate in computer science or equivalent -and- a minimum of six (6) years of demonstrated work experience in a related software support field within the last ten (10) years;

    - OR -

    successful completion of an intensive IM/IT course with a minimum of six hundred (600) hours of instruction and assignments -and-a minimum of six (6) years of demonstrated work experience in a related software support field within the last ten (10) years;

    - OR -

    a minimum of ten (10) years of demonstrated work experience in a related software support field within the last fifteen (15) years;

top

If you feel you may be compliant with one or more of these positions send your resume. We look forward to reviewing it, but please check the evaluation criteria to see if you comply. Please indicate the position you are interested in. (the subject line in the email should be automatically filled in).

 

  
   
AMTEK Home Page Employment Section Service Delivery Contact Us

 

 

 

 

 

 

Legal Privacy Webmaster