| |
Tri Service (DND) for Various Services (A000127)
- Data Entry Services
- Draftsperson
- Illustrator
- Technical
Data and Publications Manager
- Technical
Writer
- Financial
Analyst
- Junior
Project Management Specialist
- Senior
Project Management Specialist
- Project Management Assistant
- Procurement
Specialist
- Junior
Supply Specialist
- Senior
Supply Specialist
- Life
Cycle Management Specialist
- Junior
Technician
- Senior
Technician
- Junior
Engineer
- Senior
Engineer
- Specialist
- Postgraduate
Specialist
- Entry
Level Software Technician
- Junior
Software Specialist
- Intermediate
Software Specialist
- Senior
Software Specialist
top
Required Services:
These required
services will cover a range of data entry support services including,
but not necessarily limited to the following:
- filing,
directing incoming / outgoing electronic and hard copy technical
correspondence;
- keying
in and maintaining data in electronic data bases and/or spreadsheets;
and
- transferring data between files or systems
Mandatory Requirements:
-
minimum
education of two (2) years secondary school or equivalent;
-
minimum
of twenty-four (24) months of demonstrated related experience;
and
-
demonstrated
experience using commercial spreadsheet and database software
applications.
top
Required Services:
These required
services will cover a range of drafting and illustrating related
work including but not necessarily limited to the following:
- producing engineering drawings;
- producing
data lists;
- producing
illustrated parts breakdown and parts lists; and
- preparing
document illustrations.
Mandatory Requirements:
- minimum
of thirty-six (36) months of demonstrated engineering drafting
experience; and
-
minimum
of twelve (12) months of demonstrated experience in computer
aided design (CAD) within the last thirty-six (36) months.
top
Required Services:
These required
services will cover a range of drafting and illustrating related
work including but not necessarily limited to the following:
- producing
engineering drawings;
- producing
data lists;
- producing
illustrated parts breakdown and parts lists; and
- preparing
document illustrations.
Mandatory Requirements:
-
minimum
of thirty-six (36) months of demonstrated experience in the
preparation of illustrations through the use of computers within
the last sixty (60) months.
top
Required Services:
These required
services will cover a range of technical data and publications
related services including but not necessarily limited to the
following:
- physically
assembling complete or partial Technical Data Packages (TDPs)
and identifying and actioning deficiencies in data packages
of systems and equipment;
- receiving,
logging, taking custody of and acknowledging the receipt of
TDPs which describe additions, modifications and/or deletions
of technical data;
- collecting,
reviewing and updating configuration management data for input
into the environmental configuration management information
system;
- modifying, validating and compiling technical data package lists, that will include:
- technical publications Canadian Forces Technical Orders (CFTOs) in general;
- specifications;
- performance test sheets;
- equipment and system data lists and drawings;
- repair and overhaul specifications; and
- other technical descriptors in accordance with Data Technical Descriptions (DTDs) and Data Item Descriptions (DIDs);
- updating,
validating and compiling technical data action notices;
- assisting
and participating in physical and functional configuration audits
of systems and equipment;
- reviewing
documents, drawings and associated data for conformance to DND
Standards; and
- formatting
technical documents in accordance with Canadian Forces Technical
Orders (CFTOs), Computer Aided Logistics System (CALS) Data
Technical Descriptions (DTDs) and Data Item Descriptions (DIDs).
Mandatory Requirements:
-
minimum
education of two (2) years secondary school or equivalent;
-
minimum
of thirty-six (36) months, in the last seven (7) years, of demonstrated
practical hands-on experience in a technical data and publication
related activity;
-
working
knowledge of the theory, practices, procedures and techniques
applicable to technical data and publications management in
support of DND equipment systems.
For this criterion, '"working
knowledge" is defined as theoretical and practical knowledge
of the subject matter required to successfully perform related
duties and tasks efficiently and effectively.
top
Required Services:
These required
services will cover a range of technical data and publications
related services including but not necessarily limited to the
following:
- physically
assembling complete or partial Technical Data Packages (TDPs)
and identifying and actioning deficiencies in data packages
of systems and equipment;
- receiving,
logging, taking custody of and acknowledging the receipt of
TDPs which describe additions, modifications and/or deletions
of technical data;
- collecting,
reviewing and updating configuration management data for input
into the environmental configuration management information
system;
- modifying, validating and compiling technical data package lists, that will include:
- technical publications Canadian Forces Technical Orders (CFTOs) in general;
- specifications;
- performance test sheets;
- equipment and system data lists and drawings;
- repair and overhaul specifications; and
- other technical descriptors in accordance with Data Technical Descriptions (DTDs) and Data Item Descriptions (DIDs);
- updating,
validating and compiling technical data action notices;
- assisting
and participating in physical and functional configuration audits
of systems and equipment;
- reviewing
documents, drawings and associated data for conformance to DND
Standards; and
- formatting
technical documents in accordance with Canadian Forces Technical
Orders (CFTOs), Computer Aided Logistics System (CALS) Data
Technical Descriptions (DTDs) and Data Item Descriptions (DID).
Mandatory Requirements:
-
minimum of twelve (12) months of demonstrated experience writing and formatting technical documents through the use of computers within the last thirty-six (36) months.
top
Required Services:
These required
services will cover a range of financial analyses including, but
not necessarily limited to the following:
- evaluating financial procedures;
- conducting
cost benefit analysis and life cycle costing;
- developing
business plans,
- developing
models to carry out cost analysis of the resources required
to perform specific inspections related to a project;
- performing
risk analysis;
- determining
the resources required for implementation of projects such as
acquisition cost, operation and maintenance costs and both recurring
and non- recurring costs; and
- assisting
in developing costs for specific activities such as: direct
project costs, project support overhead, corporate and administrative
(C&A) overhead, costs of products and services, and other
related costs.
Mandatory Requirements:
-
university
undergraduate degree in administration or commerce or other
related degree; and
-
minimum
of forty-eight (48) months of demonstrated experience
as an accountant or as a financial analyst/advisor.
top
Required Services:
Specific tasks
may include, but are not necessarily limited to the following:
- coordinating
project management activities including financial, planning
and contracting aspects;
- planning
and organizing a project management office;
- giving
briefings on progress and concerns of the project;
- preparing
documentation in response to scheduled and unscheduled reports,
returns and observations to update management of project progress;
- coordinating
the activities of project personnel, DND internal customers
(environmental staff), contractors and other support providers;
- preparing
formal Statements of Work, work breakdown structures and compliance
charts;
- producing
draft plans and sections for incorporation into the Project
Implementation Plan or Request for Proposal; and
- preparing
draft evaluation plans, criteria and evaluation schedules.
Mandatory Requirements:
- Secondary
school diploma; and
-
Work experience of either:
a minimum of twenty-four (24) months of demonstrated experience within the last five (5) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $1 million Cdn;
- OR -
a minimum of twelve (12) months of demonstrated experience within the last three (3) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $1 million Cdn -and- having successfully completed the equivalent of six months of full time Project Management Training at a provincially accredited Project Management Training Institution or evidence of Project Management Institute accreditation.
Project management disciplines and practices stated in the PMI Project Management Body of Knowledge are as follows:
• project integration management,
• scope management,
• time management,
• cost management,
• human resource management,
• quality management,
• risk management,
• communications management
• procurement management.
top
Required Services:
Specific tasks
may include, but are not necessarily limited to the following:
- coordinating
project management activities including financial, planning
and contracting aspects;
- planning
and organizing a project management office;
- giving
briefings on progress and concerns of the project;
- preparing
documentation in response to scheduled and unscheduled reports,
returns and observations to update management of project progress;
- coordinating
the activities of project personnel, DND internal customers
(environmental staff), contractors and other support providers;
- preparing
formal Statements of Work, work breakdown structures and compliance
charts;
- producing
draft plans and sections for incorporation into the Project
Implementation Plan or Request for Proposal; and
- preparing
draft evaluation plans, criteria and evaluation schedules.
Mandatory Requirements:
- university
undergraduate degree in any field; and
-
work experience of either:
minimum of sixty (60) months of demonstrated experience within the last ten (10) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $10 million Cdn;
- OR-
minimum of thirty-six (36) months of demonstrated experience within the last eight (8) years performing project management services, as described in the Project Management Body for Knowledge (PMBOK), for a project with a minimum budget of $10 million Cdn - and - having successfully completed the equivalent of six months of full time Project Management Training at a provincially accredited Project Management Training Institution or evidence of Project Management Institute accreditation.
Project management disciplines and practices stated in the PMI Project Management Body of Knowledge are as follows:
• project integration management
• scope management
• time management
• cost management
• human resource management
• quality management
• risk management
• communications management
• procurement management
top
Required Services:
Specific tasks may include, but are not necessarily limited to the following:
-
coordinating project management activities including financial, planning and contracting aspects;
-
planning and organizing a project management office;
-
giving briefings on progress and concerns of the project;
-
preparing documentation in response to scheduled and unscheduled reports, returns and observations to update management of project progress;
-
coordinating the activities of project personnel, DND internal customers (environmental staff), contractors and other support providers;
-
preparing formal Statements of Work, work breakdown structures and compliance charts;
-
producing draft plans and sections for incorporation into the Project Implementation Plan or Request for Proposal; and
preparing draft evaluation plans, criteria and evaluation schedules.
Mandatory Requirements:
-
minimum of twelve (12) months of demonstrated experience in the last thirty-six (36) months directly providing management support services to a project management team.
top
Required Services:
Specific tasks
may include, but are not necessarily limited to the following:
- carrying
out the planning and documentation connected with purchasing
and ordering in accordance with Treasury Board guidelines
and Government regulations;
- providing
financial data and assisting with the preparation of Synopsis
Sheets or other documents intended to obtain Governmental
or Departmental spending approval;
- preparing
and presenting cash forecasts;
- preparing
and amending procurement instruments;
- preparing
life-cycle contract cost estimates;
- assisting
with the drafting, amending or vetting of procurement instruments;
- preparing
support cost option analyses;
- monitoring
contract activities;
- liaising
with contractors and PWGSC;
- preparing
supply requisition and acquisition documents; and
- maintaining
financial data.
Mandatory Requirements:
-
Combination of education and experience as follows:
university undergraduate degree in any field -and- a minimum of twenty-four (24) months of demonstrated practical hands-on experience within the last sixty (60) months in a procurement and finance related activity;
- OR -
Graduation from a provincially recognized college program in procurement, finance, economics, commerce, accounting or materiel management (or in possession of such a certificate from a provincial licensing body) -and- a minimum of thirty-six (36) months of demonstrated experience within the last six (6) Years in a procurement and finance related activity;
- OR -
Secondary school diploma -and- a minimum of sixty (60) months of demonstrated practical hands-on experience within the last eight (8) years in a procurement and finance related activity;
-
A minimum of twenty-four (24) months of the required experience as per item (1) above must have been acquired in the federal government, either as a civilian or military Crown employee or as a Contractor personnel through extensive experience dealing with the federal government.
top
Required Services:
Specific tasks
may include, but are not necessarily limited to the following:
- preparing
supply requisitions or procurement instruments.
- ordering
materiel via the Canadian Forces Supply System (CFSS).
- establishing,
verifying and modifying cataloguing data in the CFSS.
- responding
to and interfacing with the CFSS in support of equipment.
- planning
and implementing materiel provisioning and distribution.
- establishing
and controlling reservations.
- setting
up, maintaining and managing supply accounts in support of
Materiel Acquisition and Support (MA&S) activities.
- performing
supply related activities in support of configuration management. and
- provision
and/or analysis of supply activities in support of maintenance,
repair, overhaul and Equipment Management Team (EMT) activities.
Mandatory Requirements:
-
minimum
education of two (2) years secondary school or equivalent.
-
working
knowledge of DND supply, financial and technical procedures.
For this criterion, '"working knowledge" is defined
as theoretical and practical knowledge of the subject matter
required to successfully perform related duties and tasks
efficiently and effectively. and
-
minimum
of thirty-six (36) months of demonstrated practical hands-on
experience in a supply related activity within the last six
(6) years.
Required Services:
Specific tasks
may include, but are not necessarily limited to the following:
- preparing
supply requisitions or procurement instruments;
- ordering
materiel via the Canadian Forces Supply System (CFSS)
- establishing,
verifying and modifying cataloguing data in the CFSS;
- responding
to and interfacing with the CFSS in support of equipment;
- planning
and implementing materiel provisioning and distribution;
- establishing
and controlling reservations;
- setting
up, maintaining and managing supply accounts in support of
Materiel Acquisition and Support (MA&S) activities;
- performing
supply related activities in support of configuration management;
and
- provision
and/or analysis of supply activities in support of maintenance,
repair, overhaul and Equipment Management Team (EMT) activities.
Mandatory Requirements:
-
minimum education of two (2) years secondary school or equivalent;
-
minimum of sixty (60) months of demonstrated experience
within the last ten (10) years of practical hands-on experience
in a supply related activity including not less than thirty-six
(36) months of demonstrated experience managing a Nationally
Managed Equipment comprised of not less than 2,000 items within
a government supply activity or its industry equivalent.
-
working knowledge of DND supply, financial, and procurement
procedures for
equipment support.
For this criterion, “working knowledge” is defined as theoretical and practical knowledge of the subject matter required to successfully perform related duties and work efficiently and effectively. and
-
working knowledge of the theory, practices and techniques applicable to supply support for DND inventory, equipment and systems.
For this criterion, “working knowledge” is defined as theoretical and practical knowledge of the subject matter required to successfully perform related duties and work efficiently and effectively.
top
Required Services:
These required
services may include, but are not necessarily limited to the following:
- conducting
engineering studies and analysis to provide technical solutions
to stated technical/logistic or operational requirements/problems
including preparation of Engineering Changes (ECs);
- defining
standards and criteria related to equipment or systems maintenance;
- preparing,
modifying or updating specifications and drawings;
- converting
specifications and drawings to current standards or electronic
formats;
- preparing,
modifying or updating Technical Instructions and Orders;
- evaluating
existing systems;
- performing
configuration management;
- performing
analysis of maintenance, repair and overhaul data;
- investigating
Unsatisfactory Condition Reports (UCRs) and Technical Failure
Reports (TFRs);
- preparing
technical statements of requirement, draft specifications and
purchase descriptions;
- preparing
data for initial provisioning and repair parts scaling;
- reviewing
the design, development, manufacture, installation and testing
of prototype modifications;
- preparing
repair procedures, maintenance schedules and technical data;
- performing
Life Cycle Material Manager (LCMM) activities as detailed in
A-LP-113-001/FP-001 Life Cycle Management System;
- preparing
life-cycle cost estimates;
- preparing
support cost option analysis for systems and equipment;
- planning,
developing, implementing and administrating a data management
system;
- designing,
collating data entry and testing of new databases;
- planning,
directing and controlling the activities of a system development
team within scheduled cost and time parameters;
- performing
independent verification and validation services for equipment
engineering projects;
- providing
studies and recommendations on application software development
standards, methodologies and tools appropriate for the development
and maintenance of related software systems;
- performing
equipment project management services;
- reviewing
Repairable Arising Control sheets (RAC) for technical content
and making recommendations;
- reviewing
and updating material/equipment specifications;
- reviewing
disposal certificates, making appropriate recommendations, updating
maintenance handbooks, parts list and operating manuals; and
- advising
disposition of obsolete CFTO’s, Technical Publications
and equipment.
Mandatory Requirements
-
Civilian Trained Personnel
Graduation from a two (2) year technical program offered by a recognized technical institute; - or - eligibility for registration as a technician by a recognized provincial licensing body;- and -
Minimum of thirty-six (36) months of demonstrated practical hands-on experience in a maintenance management related activity;
- OR -
Canadian Forces Trained Personnel
Qualified to the QL6 trade level in a related technical field.
- Working knowledge of evaluation, preparation and implementation of technical documentation.
- Working knowledge of the preparation and distribution of Integrated Logistics Support (ILS) documentation.
-
Working knowledge of any DND environment Engineering and Maintenance Management System.
-
Working knowledge of maintenance system interfaces with the Canadian Forces Supply System (CFSS) and a DND financial/managerial accounting system.For this criterion, "working knowledge" is defined as theoretical and practical knowledge of the subject matter required to successfully perform related duties and tasks efficiently and effectively.
Required Services:
These required services may include, but are not necessarily
limited to the following:
- performing
machinist tasks such as milling, turning, grinding, and fabrication
on
manually and/or computer controlled machines;
- performing metal manipulation and welding tasks involving
oxy-acetylene, MIG, TIG and/or special metal welding techniques;
- performing vehicle mechanic and/or technician tasks involved
in the servicing and repair of vehicle systems and subsystems
found within the CF;
- performing electrician and/or electrical technician tasks
associated with the servicing and repair of vehicle, weapon
and/or communications systems found within the CF
- performing weapon technician/ armourer tasks associated with
the servicing and repair of weapon and ancillary systems found
within the CF;
- performing optical, and/or optronic servicing and repair of
vehicle and/or weapon systems found within the CF;
- performing electronic technician tasks associated with the
servicing and repair of vehicle, weapon and/or communications
systems found within the CF;
- performing installation and operation of test sensors and
programmable data recorders used in conjunction with equipment
testing; and
- performing optical data acquisition technical services including
film and digital photo services, normal and high speed video,
and/or x-ray photography.
Mandatory Requirements:
- minimum
of twenty-four (24) months of demonstrated experience providing
services in a technical field within the last sixty (60) months.
Required Services:
These required services may include, but are not necessarily limited to the following:
performing
machinist tasks such as milling, turning, grinding, and fabrication
on
manually and/or computer controlled machines;
performing
metal manipulation and welding tasks involving oxy-acetylene,
MIG, TIG and/or special metal welding techniques;
performing
vehicle mechanic and/or technician tasks involved in the servicing
and repair of vehicle systems and subsystems found within
the CF;
performing
electrician and/or electrical technician tasks associated
with the servicing and repair of vehicle, weapon and/or communications
systems found within the CF
performing
weapon technician/ armourer tasks associated with the servicing
and repair of weapon and ancillary systems found within the
CF;
performing
optical, and/or optronic servicing and repair of vehicle and/or
weapon systems found within the CF;
performing
electronic technician tasks associated with the servicing
and repair of vehicle, weapon and/or communications systems
found within the CF;
performing
installation and operation of test sensors and programmable
data recorders used in conjunction with equipment testing;
and
performing
optical data acquisition technical services including film
and digital photo services, normal and high speed video, and/or
x-ray photography.
Mandatory Requirements:
- minimum
of sixty (60) months of demonstrated experience providing
services in a technical field within the last ten (10) years.
top
Required Services:
The required
services encompass all electronic, electrical, optical, mechanical,
structural and materiel systems which may include but are not
necessarily limited to the following:
- preparing
specifications for and carrying out the integration of systems
and equipment;
- conducting
technical studies to produce technical options, validate and
assess options, assess technical risks and evaluate designs;
- developing
design and prototype engineering solutions to technical problems;
- maintaining
and updating Unsatisfactory Condition Report (UCR) and Technical
Failure Report (TFR) data bases. Researching, evaluating and
responding to UCR/TFRs in conjunction with field support representatives;
- producing
draft specifications of systems, sub-systems, equipments, interfaces
or ancillaries;
- tailoring
military or commercial standards, specifications or practices
for incorporation into system specifications;
- producing
draft technical evaluation plans and evaluation standards;
- generating
and/or evaluating test plans, procedures and reports;
- conducting
specialized electromagnetic compatibility (EMC) studies, producing
acceptable EMC standards and test procedures and evaluating
EMC /electromagnetic interference (EMI) test results;
- designing
programmable data acquisition, test sensors and recorders used
in conjunction with equipment testing;
- developing
simulation and analytical models and utilizing the models for
system and sub-system development and assessment;
- preparing
airworthiness certification management plans;
- managing
the planning, coordination, documentation and engineering efforts
connected with the airworthiness certification of modifications
to air weapon systems;
- proposing
and/or analyzing engineering change proposals, estimating costs
/ risks and making recommendations;
- preparing
budgetary estimates for the completion of technical programs;
- preparing
space and weight budgets for installations, assessing proposed
designs, evaluating prototypes and developing acceptance tests
for user hand over;
- preparing
drawings, data packages and systems manuals;
- preparing
interface standards and integration plans for the utilization
of current and new systems/equipment;
- reviewing
and making recommendations on work proposals;
- participating
in planning meetings and technical reviews relating to the design,
application management and support of software sub-systems;
- designing,
testing and modifying hardware interfaces to digital computers.
Confirming the correct functioning of hardware/software interfaces;
- preparing
specifications and statements of work for the procurement of
systems;
- developing
quality assurance and configuration management plans and practices;
- conducting
MA&S process and sub-process assessments and re-engineering;
- tracking,
correcting and recording system and equipment configuration
status and/or conformance;
- preparing
business cases, i.e. cost/benefit analysis;
- developing
and assessing maintenance strategies, plans and support requirements;
- performing
integrated logistics support (ILS) functions or providing advice
and guidance in the ILS area;
- performing
LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle
Management System Guidance Manual
- providing
equipment project management services; developing environmental
protection standards, practices or policies;
- preparing
and reviewing instructions and procedures regarding the appropriate
handling, clean-up, protective clothing and safety measures
to deal with hazardous materials. Developing or obtaining specifications
such as material Safety Data Sheets for hazardous materials
that are new to the CF;
- conducting
environmental or hazardous material assessments of equipment
and systems. Assessing the toxicological impact of materials.
Investigating alternate non-hazardous options;
- conducting
system integration analyses on the organization and processes
involved the introduction of and provision of ongoing support
to weapon systems;
- conducting
a detailed derivation of integrated logistic system requirements
for weapon systems and planning for the ongoing support to those
systems;
- planning
the conduct of, providing technical guidance to and conducting
statistical analysis of reliability, maintainability, availability
and dependability (RAMD) tests of weapon systems;
- managing
the planning, coordination, documentation and engineering efforts
connected with the configuration management of weapon systems;
- designing,
planning, implementing and modifying quality assurance programs
within manufacturing, processing or distribution systems;
- providing
human factors engineering (ergonomics) services (physical and
cognitive);
- conducting
the human factors engineering process such as planning, analysis,
design, test and evaluation, fundamentals and facilities of
various environmental systems
- conduct
reviews of structural designs to ensure compliance with appropriate
specifications, standards and guidelines;
- perform
structural engineering analyses in the area of traditional stress
analysis, preliminary design, finite element analysis, damage
tolerance assessments loads derivation, structural dynamic response
and/or fracture mechanics analysis; and
- preparing
design documentation in support of structural engineering tasks,
including draft stress reports, manufacturing drawings and/or
design drawings.
Mandatory Requirements:
-
University undergraduate degree in an applicable field of engineering from a Canadian Council of Professional Engineer (CCPE) accredited engineering program. (Copy of certificate to be provided).
-OR-
Alternatively, should the candidate's degree be from a non-CCPE accredited engineering program, their engineering education credentials must be deemed 'substantially equivalent' by the CCPE via an application to the Engineering International - Education Assessment Program, (EI-EAP), (Copy of the official CCPE judgment to be included).
-OR-
Finally, as a third alternative, the candidate's engineering education credentials will be considered compliant if the candidate is deemed eligible for registration as a Professional Engineer by a recognized provincial licensing body (Copy of certificate to be provided).
- Minimum of thirty-six (36) months of demonstrated experience within the last eight (8) years in an applicable engineering field.
top
Required Services:
The required
services encompass all electronic, electrical, optical, mechanical,
structural and materiel systems which may include but are not
necessarily limited to the following:
- preparing
specifications for and carrying out the integration of systems
and equipment;
- conducting
technical studies to produce technical options, validate and
assess options, assess technical risks and evaluate designs;
- developing
design and prototype engineering solutions to technical problems;
- maintaining
and updating Unsatisfactory Condition Report (UCR) and Technical
Failure Report (TFR) data bases. Researching, evaluating and
responding to UCR/TFRs in conjunction with field support representatives;
- producing
draft specifications of systems, sub-systems, equipments,
interfaces or ancillaries;
- tailoring
military or commercial standards, specifications or practices
for incorporation into system specifications;
- producing
draft technical evaluation plans and evaluation standards;
- generating
and/or evaluating test plans, procedures and reports;
- conducting
specialized electromagnetic compatibility (EMC) studies, producing
acceptable EMC standards and test procedures and evaluating
EMC /electromagnetic interference (EMI) test results;
- designing
programmable data acquisition, test sensors and recorders
used in conjunction with equipment testing;
- developing
simulation and analytical models and utilizing the models
for system and sub-system development and assessment;
- preparing
airworthiness certification management plans;
- managing
the planning, coordination, documentation and engineering
efforts connected with the airworthiness certification of
modifications to air weapon systems;
- proposing
and/or analyzing engineering change proposals, estimating
costs / risks and making recommendations;
- preparing
budgetary estimates for the completion of technical programs;
- preparing
space and weight budgets for installations, assessing proposed
designs, evaluating prototypes and developing acceptance tests
for user hand over;
- preparing
drawings, data packages and systems manuals;
- preparing
interface standards and integration plans for the utilization
of current and new systems/equipment;
- reviewing
and making recommendations on work proposals;
- participating
in planning meetings and technical reviews relating to the
design, application management and support of software sub-systems;
- designing,
testing and modifying hardware interfaces to digital computers.
Confirming the correct functioning of hardware/software interfaces;
- preparing
specifications and statements of work for the procurement
of systems;
- developing
quality assurance and configuration management plans and practices;
- conducting
MA&S process and sub-process assessments and re-engineering;
- tracking,
correcting and recording system and equipment configuration
status and/or conformance;
- preparing
business cases, i.e. cost/benefit analysis;
- developing
and assessing maintenance strategies, plans and support requirements;
- performing
integrated logistics support (ILS) functions or providing
advice and guidance in the ILS area;
- performing
LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle
Management System Guidance Manual
- providing
equipment project management services; developing environmental
protection standards, practices or policies;
- preparing
and reviewing instructions and procedures regarding the appropriate
handling, clean-up, protective clothing and safety measures
to deal with hazardous materials. Developing or obtaining
specifications such as material Safety Data Sheets for hazardous
materials that are new to the CF;
- conducting
environmental or hazardous material assessments of equipment
and systems. Assessing the toxicological impact of materials.
Investigating alternate non-hazardous options;
- conducting
system integration analyses on the organization and processes
involved the introduction of and provision of ongoing support
to weapon systems;
- conducting
a detailed derivation of integrated logistic system requirements
for weapon systems and planning for the ongoing support to
those systems;
- planning
the conduct of, providing technical guidance to and conducting
statistical analysis of reliability, maintainability, availability
and dependability (RAMD) tests of weapon systems;
- managing
the planning, coordination, documentation and engineering
efforts connected with the configuration management of weapon
systems;
- designing,
planning, implementing and modifying quality assurance programs
within manufacturing, processing or distribution systems;
- providing
human factors engineering (ergonomics) services (physical
and cognitive);
- conducting
the human factors engineering process such as planning, analysis,
design, test and evaluation, fundamentals and facilities of
various environmental systems
- conduct
reviews of structural designs to ensure compliance with appropriate
specifications, standards and guidelines;
- perform
structural engineering analyses in the area of traditional
stress analysis, preliminary design, finite element analysis,
damage tolerance assessments loads derivation, structural
dynamic response and/or fracture mechanics analysis; and
- preparing
design documentation in support of structural engineering
tasks, including draft stress reports, manufacturing drawings
and/or design drawings.
Mandatory Requirement:
-
University undergraduate degree in an applicable field of engineering from a Canadian Council of Professional Engineer (CCPE) accredited engineering program. (Copy of certificate to be provided).
-OR-
Alternativly, should the candidate's degree be from a non-CCPE accredited engineering program, their engineering education credentials must be deemed 'substantially equivalent' by the CCPE via an application to the Engineering International - Education Assessment Program, (EI-EAP), (Copy of the official CCPE judgment to be included).
-OR-
Finally, as a third alternative, the candidate's engineering education credentials will be considered compliant if the candidate is deemed eligible for registration as a Professional Engineer by a recognized provincial licensing body (Copy of certificate to be provided); and
- Minimum of thirty-six (36) months of demonstrated experience within the last eight (8) years in an applicable engineering field.
Required Services:
The required
services encompass all electronic, electrical, optical, mechanical,
structural and materiel systems which may include but are not
necessarily limited to the following:
- preparing specifications for and carrying out the integration
of systems and equipment;
- conducting technical studies to produce technical options, validate
and assess options, assess technical risks and evaluate designs;
- developing design and prototype engineering solutions to technical
problems;
- maintaining and updating Unsatisfactory Condition Report (UCR)
and Technical Failure Report (TFR) data bases. Researching, evaluating
and responding to UCR/TFRs in conjunction with field support representatives;
- producing draft specifications of systems, sub-systems, equipments,
interfaces or ancillaries;
- tailoring military or commercial standards, specifications or
practices for incorporation into system specifications;
- producing draft technical evaluation plans and evaluation standards;
- generating and/or evaluating test plans, procedures and reports;
- conducting specialized electromagnetic compatibility (EMC) studies,
producing acceptable EMC standards and test procedures and evaluating
EMC /electromagnetic interference (EMI) test results;
- designing programmable data acquisition, test sensors and recorders
used in conjunction with equipment testing;
- developing simulation and analytical models and utilizing the
models for system and sub-system development and assessment;
- preparing airworthiness certification management plans;
- managing the planning, coordination, documentation and engineering
efforts connected with the airworthiness certification of modifications
to air weapon systems;
- proposing and/or analyzing engineering change proposals, estimating
costs / risks and making recommendations;
- preparing budgetary estimates for the completion of technical
programs;
- preparing space and weight budgets for installations, assessing
proposed designs, evaluating prototypes and developing acceptance
tests for user hand over;
- preparing drawings, data packages and systems manuals;
- preparing interface standards and integration plans for the
utilization of current and new systems/equipment;
- reviewing and making recommendations on work proposals;
- participating in planning meetings and technical reviews relating
to the design, application management and support of software
sub-systems;
- designing, testing and modifying hardware interfaces to digital
computers. Confirming the correct functioning of hardware/software
interfaces;
- preparing specifications and statements of work for the procurement
of systems;
- developing quality assurance and configuration management plans
and practices;
- conducting MA&S process and sub-process assessments and
re-engineering;
- tracking, correcting and recording system and equipment configuration
status and/or conformance;
- preparing business cases, i.e. cost/benefit analysis;
- developing and assessing maintenance strategies, plans and support
requirements;
- performing integrated logistics support (ILS) functions or providing
advice and guidance in the ILS area;
- performing LCMM functions as defined in A-LP-113-001/FP-001;
Life Cycle Management System Guidance Manual
- providing equipment project management services; developing
environmental protection standards, practices or policies;
- preparing and reviewing instructions and procedures regarding
the appropriate handling, clean-up, protective clothing and safety
measures to deal with hazardous materials. Developing or obtaining
specifications such as material Safety Data Sheets for hazardous
materials that are new to the CF;
- conducting environmental or hazardous material assessments of
equipment and systems. Assessing the toxicological impact of materials.
Investigating alternate non-hazardous options;
- conducting system integration analyses on the organization and
processes involved the introduction of and provision of ongoing
support to weapon systems;
- conducting a detailed derivation of integrated logistic system
requirements for weapon systems and planning for the ongoing support
to those systems;
- planning the conduct of, providing technical guidance to and
conducting statistical analysis of reliability, maintainability,
availability and dependability (RAMD) tests of weapon systems;
- managing the planning, coordination, documentation and engineering
efforts connected with the configuration management of weapon
systems;
- designing, planning, implementing and modifying quality assurance
programs within manufacturing, processing or distribution systems;
- providing human factors engineering (ergonomics) services (physical
and cognitive);
- conducting the human factors engineering process such as planning,
analysis, design, test and evaluation, fundamentals and facilities
of various environmental systems
- conduct reviews of structural designs to ensure compliance with
appropriate specifications, standards and guidelines;
- perform structural engineering analyses in the area of traditional
stress analysis, preliminary design, finite element analysis,
damage tolerance assessments loads derivation, structural dynamic
response and/or fracture mechanics analysis; and
- preparing design documentation in support of structural engineering
tasks, including draft stress reports, manufacturing drawings
and/or design drawings.
Mandatory
Requirements:
-
university
undergraduate degree in an applicable field of engineering,
science or mathematics; and
-
minimum of sixty (60) months
of demonstrated experience in a related specialist field within
the last ten (10) years.
top
Required Services:
The required
services encompass all electronic, electrical, optical, mechanical,
structural and materiel systems which may include but are not
necessarily limited to the following:
- preparing
specifications for and carrying out the integration of systems
and equipment;
- conducting
technical studies to produce technical options, validate and
assess options, assess technical risks and evaluate designs;
- developing
design and prototype engineering solutions to technical problems;
- maintaining
and updating Unsatisfactory Condition Report (UCR) and Technical
Failure Report (TFR) data bases. Researching, evaluating and
responding to UCR/TFRs in conjunction with field support representatives;
- producing
draft specifications of systems, sub-systems, equipments,
interfaces or ancillaries;
- tailoring
military or commercial standards, specifications or practices
for incorporation into system specifications;
- producing
draft technical evaluation plans and evaluation standards;
- generating
and/or evaluating test plans, procedures and reports;
- conducting
specialized electromagnetic compatibility (EMC) studies, producing
acceptable EMC standards and test procedures and evaluating
EMC /electromagnetic interference (EMI) test results;
- designing
programmable data acquisition, test sensors and recorders
used in conjunction with equipment testing;
- developing
simulation and analytical models and utilizing the models
for system and sub-system development and assessment;
- preparing
airworthiness certification management plans;
- managing
the planning, coordination, documentation and engineering
efforts connected with the airworthiness certification of
modifications to air weapon systems;
- proposing
and/or analyzing engineering change proposals, estimating
costs / risks and making recommendations;
- preparing
budgetary estimates for the completion of technical programs;
- preparing
space and weight budgets for installations, assessing proposed
designs, evaluating prototypes and developing acceptance tests
for user hand over;
- preparing
drawings, data packages and systems manuals;
- preparing
interface standards and integration plans for the utilization
of current and new systems/equipment;
- reviewing
and making recommendations on work proposals;
- participating
in planning meetings and technical reviews relating to the
design, application management and support of software sub-systems;
- designing,
testing and modifying hardware interfaces to digital computers.
Confirming the correct functioning of hardware/software interfaces;
- preparing
specifications and statements of work for the procurement
of systems;
- developing
quality assurance and configuration management plans and practices;
- conducting
MA&S process and sub-process assessments and re-engineering;
- tracking,
correcting and recording system and equipment configuration
status and/or conformance;
- preparing
business cases, i.e. cost/benefit analysis;
- developing
and assessing maintenance strategies, plans and support requirements;
- performing
integrated logistics support (ILS) functions or providing
advice and guidance in the ILS area;
- performing
LCMM functions as defined in A-LP-113-001/FP-001; Life Cycle
Management System Guidance Manual
- providing
equipment project management services; developing environmental
protection standards, practices or policies;
- preparing
and reviewing instructions and procedures regarding the appropriate
handling, clean-up, protective clothing and safety measures
to deal with hazardous materials. Developing or obtaining
specifications such as material Safety Data Sheets for hazardous
materials that are new to the CF;
- conducting
environmental or hazardous material assessments of equipment
and systems. Assessing the toxicological impact of materials.
Investigating alternate non-hazardous options;
- conducting
system integration analyses on the organization and processes
involved the introduction of and provision of ongoing support
to weapon systems;
- conducting
a detailed derivation of integrated logistic system requirements
for weapon systems and planning for the ongoing support to
those systems;
- planning
the conduct of, providing technical guidance to and conducting
statistical analysis of reliability, maintainability, availability
and dependability (RAMD) tests of weapon systems;
- managing
the planning, coordination, documentation and engineering
efforts connected with the configuration management of weapon
systems;
- designing,
planning, implementing and modifying quality assurance programs
within manufacturing, processing or distribution systems;
- providing
human factors engineering (ergonomics) services (physical
and cognitive);
- conducting
the human factors engineering process such as planning, analysis,
design, test and evaluation, fundamentals and facilities of
various environmental systems
- conduct
reviews of structural designs to ensure compliance with appropriate
specifications, standards and guidelines;
- perform
structural engineering analyses in the area of traditional
stress analysis, preliminary design, finite element analysis,
damage tolerance assessments loads derivation, structural
dynamic response and/or fracture mechanics analysis; and
- preparing
design documentation in support of structural engineering
tasks, including draft stress reports, manufacturing drawings
and/or design drawings.
Mandatory Requirements:
-
university
postgraduate degree in an applicable field of engineering,
science or mathematics; and
-
minimum
of thirty-six (36) months of demonstrated experience in a
related specialist field within the last six (6) years.
top
Required Services:
These required
services will include, but are not necessarily limited to the
following:
-
performing
Data Architect tasks such as:
- analyzing
automated or manual information systems and developing
data models;
- extracting
data models from existing legacy information systems;(3)
planning and estimating modifications of legacy information
systems to adhere to new data models;
- developing
information management strategies;
- developing
action plans for enhancing interoperability between legacy
information systems;
-
managing data repositories; and
- preparing
briefings to management;
-
performing
Software Independent Validation and Verification Specialist
tasks such as:
- reviewing
software documentation and visiting development organizations
to assess project health;
- suggesting
action to improve project health; and
- assessing
project risk and recommending mitigation strategies;
-
conducting
Process Analyst tasks such as:
- leading
software process audits;
- preparing
recommended courses of action after process audits;
- briefing
procurement and technical authorities on contract and
technological risks;
- assisting
organizations in implementing improvement plans; and
- providing
cost-benefit analysis on process improvement plans;
-
performing
Internet Publisher/Internet Site Designer tasks such as:
- designing
and building web sites;
- incorporating
image files of varying source file formats and edit as
required;
- creating
page linkages and mail linkages, implementing Java scripts
as required;
- implementing
Hyper-text Markup Language (HTML) and similar systems
on a private (IntraNet) network; and
- performing
maintenance on the web sites and private networks;
-
performing
design activities such as:
- designing
instrument interfaces between hardware and software and
confirming interoperability;
-
designing, testing and modifying hardware interfaces to
digital computers; and
- writing
software test code in appropriate languages to confirm
hardware/software interfaces;
-
performing
Computer Aided Software Engineering (CASE) Tool Specialist
tasks such as:
- providing
advice and assistance on CASE tool evaluation and selection;
-
troubleshooting CASE tool functionality problems;
- solving
problems with CASE tool interoperability;
- performing
configuration of tools; and
- providing
support in CASE tool usage; and
-
performing
software programming activities such as:
- providing
advice and assistance on software programming code alteration
and correction;
- troubleshooting
software problems with custom applications;
- determining
and correcting protocol interoperability between applications;
and
- writing
new software code and associated documentation.
Mandatory Requirements:
-
two
(2) year College level certificate in a computer field.
- OR -
successful completion of an intensive Information Management/
Information Technology (IM/IT) course with a minimum of six
hundred (600) hours of instruction and assignments.
- OR -
secondary school diploma with a minimum of twelve (12) months
of demonstrated work experience in a related software support
field within the last thirty-six (36) months.
top
Required Services:
These required
services will include, but are not necessarily limited to the
following:
- performing
Data Architect tasks such as:
- analyzing
automated or manual information systems and developing
data models;
- extracting
data models from existing legacy information systems;(3)
planning and estimating modifications of legacy information
systems to adhere to new data models;
- developing
information management strategies;
- developing
action plans for enhancing interoperability between legacy
information systems;
- managing data repositories; and
- preparing
briefings to management;
- performing
Software Independent Validation and Verification Specialist
tasks such as:
- reviewing
software documentation and visiting development organizations
to assess project health;
- suggesting
action to improve project health; and
- assessing
project risk and recommending mitigation strategies;
- conducting
Process Analyst tasks such as:
- leading
software process audits;
- preparing
recommended courses of action after process audits;
- briefing
procurement and technical authorities on contract and
technological risks;
- assisting
organizations in implementing improvement plans; and
- providing
cost-benefit analysis on process improvement plans;
- performing
Internet Publisher/Internet Site Designer tasks such as:
- designing
and building web sites;
- incorporating
image files of varying source file formats and edit as
required;
- creating
page linkages and mail linkages, implementing Java scripts
as required;
- implementing
Hyper-text Markup Language (HTML) and similar systems
on a private (IntraNet) network; and
- performing
maintenance on the web sites and private networks;
- performing
design activities such as:
- designing
instrument interfaces between hardware and software and
confirming interoperability;
- designing, testing and modifying hardware interfaces to
digital computers; and
- writing
software test code in appropriate languages to confirm
hardware/software interfaces;
- performing
Computer Aided Software Engineering (CASE) Tool Specialist
tasks such as:
- providing
advice and assistance on CASE tool evaluation and selection;
- troubleshooting CASE tool functionality problems;
- solving
problems with CASE tool interoperability;
- performing
configuration of tools; and
- providing
support in CASE tool usage; and
- performing
software programming activities such as:
- providing
advice and assistance on software programming code alteration
and correction;
- troubleshooting
software problems with custom applications;
- determining
and correcting protocol interoperability between applications;
and
- writing
new software code and associated documentation.
Mandatory Requirements:
-
university undergraduate degree in computer engineering or computer science -and- a minimum of six (6) months of demonstrated work experience in a related software support field within the last thirty-six (36) months.
- OR -
two year College level certificate in computer science or
equivalent -and- a minimum of twelve (12) months of demonstrated
work experience in a related software support field within
the last thirty-six (36) months.
- OR -
successful completion of an intensive IM/IT course with
a minimum of six hundred (600) hours of instruction and assignments
-and- a minimum of twelve (12) months of demonstrated work
experience in a related software support field within the
last thirty-six (36) months.
- OR -
a minimum of thirty-six (36) months of demonstrated work experience
in a related software support field within the last sixty
(60) months.
top
Required Services:
These required
services will include, but are not necessarily limited to the
following:
- performing
Data Architect tasks such as:
- analyzing
automated or manual information systems and developing
data models;
- extracting
data models from existing legacy information systems;(3)
planning and estimating modifications of legacy information
systems to adhere to new data models;
- developing
information management strategies;
- developing
action plans for enhancing interoperability between legacy
information systems;
- managing data repositories; and
- preparing
briefings to management;
- performing
Software Independent Validation and Verification Specialist
tasks such as:
- reviewing
software documentation and visiting development organizations
to assess project health;
- suggesting
action to improve project health; and
- assessing
project risk and recommending mitigation strategies;
- conducting
Process Analyst tasks such as:
- leading
software process audits;
- preparing
recommended courses of action after process audits;
- briefing
procurement and technical authorities on contract and
technological risks;
- assisting
organizations in implementing improvement plans; and
- providing
cost-benefit analysis on process improvement plans;
- performing
Internet Publisher/Internet Site Designer tasks such as:
- designing
and building web sites;
- incorporating
image files of varying source file formats and edit as
required;
- creating
page linkages and mail linkages, implementing Java scripts
as required;
- implementing
Hyper-text Markup Language (HTML) and similar systems
on a private (IntraNet) network; and
- performing
maintenance on the web sites and private networks;
- performing
design activities such as:
- designing
instrument interfaces between hardware and software and
confirming interoperability;
- designing, testing and modifying hardware interfaces to
digital computers; and
- writing
software test code in appropriate languages to confirm
hardware/software interfaces;
- performing
Computer Aided Software Engineering (CASE) Tool Specialist
tasks such as:
- providing
advice and assistance on CASE tool evaluation and selection;
- troubleshooting CASE tool functionality problems;
- solving
problems with CASE tool interoperability;
- performing
configuration of tools; and
- providing
support in CASE tool usage; and
- performing
software programming activities such as:
- providing
advice and assistance on software programming code alteration
and correction;
- troubleshooting
software problems with custom applications;
- determining
and correcting protocol interoperability between applications;
and
- writing
new software code and associated documentation
Mandatory Requirements:
-
university undergraduate degree in computer engineering or computer science -and- a minimum of thirty-six (36) months of demonstrated work experience in a related software support field within the last sixty (60) months.
- OR -
two (2) year College level certificate in computer science
or equivalent -and- a minimum of forty-eight (48) months of
demonstrated work experience in a related software support
field within the last seven (7) years.
- OR -
successful completion of an intensive IM/IT course with a
minimum of six hundred (600) hours of instruction and assignments
-and-minimum of forty-eight (48) months of demonstrated work
experience in related software support field within the last
seven (7) years.
- OR -
a minimum of sixty (60) months of demonstrated work experience
in a related software support field within the last eight
(8) years.
top
Required Services:
These required
services will include, but are not necessarily limited to the
following:
- performing
Data Architect tasks such as:
- analyzing
automated or manual information systems and developing
data models;
- extracting
data models from existing legacy information systems;(3)
planning and estimating modifications of legacy information
systems to adhere to new data models;
- developing
information management strategies;
- developing
action plans for enhancing interoperability between legacy
information systems;
- managing data repositories; and
- preparing
briefings to management;
- performing
Software Independent Validation and Verification Specialist
tasks such as:
- reviewing
software documentation and visiting development organizations
to assess project health;
- suggesting
action to improve project health; and
- assessing
project risk and recommending mitigation strategies;
- conducting
Process Analyst tasks such as:
- leading
software process audits;
- preparing
recommended courses of action after process audits;
- briefing
procurement and technical authorities on contract and
technological risks;
- assisting
organizations in implementing improvement plans; and
- providing
cost-benefit analysis on process improvement plans;
- performing
Internet Publisher/Internet Site Designer tasks such as:
- designing
and building web sites;
- incorporating
image files of varying source file formats and edit as
required;
- creating
page linkages and mail linkages, implementing Java scripts
as required;
- implementing
Hyper-text Markup Language (HTML) and similar systems
on a private (IntraNet) network; and
- performing
maintenance on the web sites and private networks;
- performing
design activities such as:
- designing
instrument interfaces between hardware and software and
confirming interoperability;
- designing, testing and modifying hardware interfaces to
digital computers; and
- writing
software test code in appropriate languages to confirm
hardware/software interfaces;
- performing
Computer Aided Software Engineering (CASE) Tool Specialist
tasks such as:
- providing
advice and assistance on CASE tool evaluation and selection;
- troubleshooting CASE tool functionality problems;
- solving
problems with CASE tool interoperability;
- performing
configuration of tools; and
- providing
support in CASE tool usage; and
- performing
software programming activities such as:
Mandatory Requirements:
-
university undergraduate degree in computer engineering or computer science -and- a minimum of thirty-six (36) months of demonstrated work experience in a related software support field within the last sixty (60) months.
- OR -
university undergraduate degree in computer engineering or computer science -and- a minimum of sixty (60) months of demonstrated work experience in a related software support field within the last seven (7) years.
- OR -
two (2) year College level certificate in computer science or equivalent -and- a minimum of six (6) years of demonstrated work experience in a related software support field within the last ten (10) years.
- OR -
successful completion of an intensive IM/IT course with a minimum of six hundred (600) hours of instruction and assignments -and-a minimum of six (6) years of demonstrated work experience in a related software support field within the last ten (10) years.
- OR -
a minimum of ten (10) years of demonstrated work experience in a related software support field within the last fifteen (15) years.
top
If you feel you may be compliant with one or more
of these positions send your resume. We look forward to reviewing
it, but please check the evaluation criteria to see if you comply.
Back to Tri-Service Top Page
|
|
